Austin  Delatorre
Austin Delatorre
Last Seen : 2024-02-27 09:52:15



Position I am Austin Delatorre – A swimming pool lighting expert, I have written many articles sharing knowledge about pool lights at BLLS-Lighting.
Recent Updates
  • How To Install A Pool Light?
    When it comes to finding reliable information on installing LED pool lights, it can be challenging. Different types of lights and regional variations make it even more confusing. But fret not! This article has compiled a list of common pool light installation methods from around the world to help you. With this basic guide to pool lighting installation, you'll become an expert in no time!...
    0 Comments 0 Shares
  • What to do when your pool breaker trips

    We had our pool installed 2 years ago. The pool company that installed the pool also provides pool maintenance," said Joni.

    "From Day 1 we had problems, mostly electrical. The main breaker keeps tripping. The pool pump requires GFCI (ground fault circuit interrupter), which I think we have. What should we do, because the pool breaker trips over and over?"

    >>> See More Rope Lights vs LED Strip Lights: What are the differences at https://www.pinterest.com/pin/1146095805150767046/

    If Your Pool Breaker Trips, You Don’t Need a Pool Company

    Pool company maintenance professionals know a lot. What your pool maintenance team does is important. Clean pools prevent bacterial infections and other problems. Your pool equipment will operate more efficiently and last longer with proper pool maintenance.

    Swimming pool electrical issues, especially if your pool breaker trips repeatedly, require a licensed electrician. Faulty pool wiring can lead to shocks and even electrocution. It's vital to address electrical problems promptly to ensure safety.

    If you suspect you are experiencing electrical shock, exit the swimming pool immediately and avoid using the metal ladder. Symptoms of electrical shock in the pool may include a tingling sensation, complaints of tingling or "odd" sensations from swimmers when they exit the pool, flickering underwater lights, motionless swimmers, muscle cramps, paralysis, several upset swimmers moving away from an area simultaneously, or swimmers acting panicked or unsettled.

    Electricity Around Pools and Common Electrical Problems

    Your swimming pool has numerous electrical components, so it's important to be aware of where electricity is located in and around your pool area. Some areas where you may find electricity include electrical outlets/switches, electrical products such as TVs and sound systems, overhead power lines, pool equipment like auto-chlorination systems and pumps, power/extension cords, and underwater lights.

    Pool breaker trips indicate a serious problem, and it's crucial to address it promptly. Keep children out of the pool until a licensed electrician has checked the breaker box, equipment, and GFCI. Other common electrical problems with swimming pools may include burnt-out bulbs in underwater light fixtures, non-wireless automation systems to monitor pH levels, and issues with the pool pump such as blown fuses, motor disconnect switches, timer clocks, voltage fluctuations, and wiring.

    >>> See More How to Install Offroad Lights on Your Vehicle at https://ledlightsblls.blogspot.com/2023/03/how-to-install-offroad-lights-on-your.html

    Why You Need TIO Electric for Electrical Pool Problems and Repairs

    If you want to keep everything pool-related with your pool company, that's not a problem. Just ask them to call Turn It On Electric for licensed electrical contracting in the Phoenix and Tucson areas.

    Handling electrical work for swimming pools is not a DIY task. TIO Electric professionals have the necessary experience to deal with swimming pool electrical issues. Our services include bonding, which connects and controls electrical voltage transmission, grounding to redirect excess electrical currents to the ground, and GFCI installation, which ensures electrical safety in the swimming pool. Trust us to take care of your swimming pool wiring and electricity needs.

    Your safety is our priority, and we encourage you to contact TIO Electric with any questions or concerns regarding swimming pool electrical issues. Stay safe and enjoy your pool with peace of mind.

    >>> See More Bright Ideas: Exploring the World of LED Lights at https://www.pinterest.com/pin/934496991413084309/
    What to do when your pool breaker trips We had our pool installed 2 years ago. The pool company that installed the pool also provides pool maintenance," said Joni. "From Day 1 we had problems, mostly electrical. The main breaker keeps tripping. The pool pump requires GFCI (ground fault circuit interrupter), which I think we have. What should we do, because the pool breaker trips over and over?" >>> See More Rope Lights vs LED Strip Lights: What are the differences at https://www.pinterest.com/pin/1146095805150767046/ If Your Pool Breaker Trips, You Don’t Need a Pool Company Pool company maintenance professionals know a lot. What your pool maintenance team does is important. Clean pools prevent bacterial infections and other problems. Your pool equipment will operate more efficiently and last longer with proper pool maintenance. Swimming pool electrical issues, especially if your pool breaker trips repeatedly, require a licensed electrician. Faulty pool wiring can lead to shocks and even electrocution. It's vital to address electrical problems promptly to ensure safety. If you suspect you are experiencing electrical shock, exit the swimming pool immediately and avoid using the metal ladder. Symptoms of electrical shock in the pool may include a tingling sensation, complaints of tingling or "odd" sensations from swimmers when they exit the pool, flickering underwater lights, motionless swimmers, muscle cramps, paralysis, several upset swimmers moving away from an area simultaneously, or swimmers acting panicked or unsettled. Electricity Around Pools and Common Electrical Problems Your swimming pool has numerous electrical components, so it's important to be aware of where electricity is located in and around your pool area. Some areas where you may find electricity include electrical outlets/switches, electrical products such as TVs and sound systems, overhead power lines, pool equipment like auto-chlorination systems and pumps, power/extension cords, and underwater lights. Pool breaker trips indicate a serious problem, and it's crucial to address it promptly. Keep children out of the pool until a licensed electrician has checked the breaker box, equipment, and GFCI. Other common electrical problems with swimming pools may include burnt-out bulbs in underwater light fixtures, non-wireless automation systems to monitor pH levels, and issues with the pool pump such as blown fuses, motor disconnect switches, timer clocks, voltage fluctuations, and wiring. >>> See More How to Install Offroad Lights on Your Vehicle at https://ledlightsblls.blogspot.com/2023/03/how-to-install-offroad-lights-on-your.html Why You Need TIO Electric for Electrical Pool Problems and Repairs If you want to keep everything pool-related with your pool company, that's not a problem. Just ask them to call Turn It On Electric for licensed electrical contracting in the Phoenix and Tucson areas. Handling electrical work for swimming pools is not a DIY task. TIO Electric professionals have the necessary experience to deal with swimming pool electrical issues. Our services include bonding, which connects and controls electrical voltage transmission, grounding to redirect excess electrical currents to the ground, and GFCI installation, which ensures electrical safety in the swimming pool. Trust us to take care of your swimming pool wiring and electricity needs. Your safety is our priority, and we encourage you to contact TIO Electric with any questions or concerns regarding swimming pool electrical issues. Stay safe and enjoy your pool with peace of mind. >>> See More Bright Ideas: Exploring the World of LED Lights at https://www.pinterest.com/pin/934496991413084309/
    0 Comments 0 Shares
  • POOL LIGHT REPAIR: TIPS FOR A QUICK FIX
    A swimming pool is a valuable asset that deserves attention and maintenance. You don't have to call a professional for pool light repairs. With expert guidance from Frank Wall, you can learn how to repair or replace your pool lights without causing any damage to yourself or your pool. Get essential advice and troubleshooting techniques for pool light repair so you can become your own pool expert. Save time and money with DIY repairs done the right way.
    >>> See more Review Utilitech 196.8-in Plug-In Under Cabinet LED Strip Light at: https://band.us/band/90424574/post/24

    Pool Light Repair

    When water and electrical circuits come together, extra caution should be taken. Light fixtures are designed to stay dry. If there is water inside a light fixture, it means the lens seal has been broken or distorted. Chlorine and old gaskets can cause them to distort and degrade.

    Therefore, if any water is present in any of the housing units, your pool light can break at any moment. It's time to save your pool lights! Always make sure to follow the following advice before attempting any pool light repairs:

    Turn off the power to your pool at the main circuit breaker.
    Switch off the ground fault circuit interrupter (GFCI) to ensure that no electricity is flowing through the circuits.
    Press a non-contact voltage tester against your light socket when turning it on and off. This will confirm that the electricity has been shut off by detecting any presence of electricity. This device is also known as an electrical test meter and can be purchased at any hardware store for $10-$30.
    Have dry towels ready.
    You don't need to drain your pool for any of these repairs.
    It's a good idea to regularly swim with pool goggles and inspect your pool lights for leaks.
    How to Fix a Leaky Pool Light
    Remove the locking screw.
    Pull the light out of the pool wall and place it on the edge of the pool on a dry towel. (The cable should be long enough to do this.)
    Remove the lens frame and take out the distorted or broken gasket.
    Replace the old gasket with a new one.
    Reassemble the housing unit, ensuring everything is completely dry.
    Place the housing unit back into the pool wall.
    Slide the locking screw back in place.
    >>> See more Top 5 Best LED Kitchen Strip Lights Under Cabinet at: https://www.deviantart.com/ledlightsblls/status-update/Top-5-Best-LED-Kitchen-986637735
    How to Fix a Loose Light Fixture

    If the light fixture holding the pool light wobbles when you touch it, it means the locking screw needs to be tightened. Grab a Phillips screwdriver and pool goggles and tighten that screw!

    Hold the screwdriver next to you on the edge of the pool on a dry towel.
    With pool goggles on, get into the pool next to the loose fixture.
    Locate the locking screw of the fixture. It's a single screw on the top of a fixture's face that secures the pool light to the wall.
    Tighten the locking screw as tightly as possible.
    How to Repair a Pool Light Bulb

    For this pool light repair, it's good to have another person with you. One person watches the pool light as you turn the power back on. Also, purchase electrical contact grease if you can find it. It will make it much easier to remove any light bulb.

    Check your switchboard. If the light still doesn't turn on, the bulb has burned out.
    Unscrew the housing unit and place it on a dry towel on the edge of the pool near you.
    Insert a small amount of electrical contact grease into the socket.
    Remove the light bulb. Shake it next to your ear. If you hear a loose sound, it means the bulb has burned out and needs to be replaced.
    Unscrew the old light bulb and place it on the dry towel.
    Screw in a new light bulb.
    Test the new light bulb by quickly turning on your pool's power. (This should be done as quickly as possible because new light bulbs burn out when outside of the water.) It's best if someone else watches the light while you turn on the power.
    Checking for a Faulty or Tripped Switch

    If you don't hear anything rattling in the light bulb, it may be a tripped switch.

    Go to your switch panel. It should be in the AFS position with a red or yellow square pointing next to it.
    Make sure you turn off any additional accessories you have on the same circuit.
    Reset your switch by pressing it down completely and then moving it in the opposite direction to restore it. (If the switch automatically switches back on, you may need a new switch.
    >>> See more Best LED Strip Lights For Under Kitchen Cabinets at: https://www.linkedin.com/posts/bestledlightstripsblls_best-led-strip-lights-for-under-kitchen-cabinets-activity-7116241239686971392-KHyS
    POOL LIGHT REPAIR: TIPS FOR A QUICK FIX A swimming pool is a valuable asset that deserves attention and maintenance. You don't have to call a professional for pool light repairs. With expert guidance from Frank Wall, you can learn how to repair or replace your pool lights without causing any damage to yourself or your pool. Get essential advice and troubleshooting techniques for pool light repair so you can become your own pool expert. Save time and money with DIY repairs done the right way. >>> See more Review Utilitech 196.8-in Plug-In Under Cabinet LED Strip Light at: https://band.us/band/90424574/post/24 Pool Light Repair When water and electrical circuits come together, extra caution should be taken. Light fixtures are designed to stay dry. If there is water inside a light fixture, it means the lens seal has been broken or distorted. Chlorine and old gaskets can cause them to distort and degrade. Therefore, if any water is present in any of the housing units, your pool light can break at any moment. It's time to save your pool lights! Always make sure to follow the following advice before attempting any pool light repairs: Turn off the power to your pool at the main circuit breaker. Switch off the ground fault circuit interrupter (GFCI) to ensure that no electricity is flowing through the circuits. Press a non-contact voltage tester against your light socket when turning it on and off. This will confirm that the electricity has been shut off by detecting any presence of electricity. This device is also known as an electrical test meter and can be purchased at any hardware store for $10-$30. Have dry towels ready. You don't need to drain your pool for any of these repairs. It's a good idea to regularly swim with pool goggles and inspect your pool lights for leaks. How to Fix a Leaky Pool Light Remove the locking screw. Pull the light out of the pool wall and place it on the edge of the pool on a dry towel. (The cable should be long enough to do this.) Remove the lens frame and take out the distorted or broken gasket. Replace the old gasket with a new one. Reassemble the housing unit, ensuring everything is completely dry. Place the housing unit back into the pool wall. Slide the locking screw back in place. >>> See more Top 5 Best LED Kitchen Strip Lights Under Cabinet at: https://www.deviantart.com/ledlightsblls/status-update/Top-5-Best-LED-Kitchen-986637735 How to Fix a Loose Light Fixture If the light fixture holding the pool light wobbles when you touch it, it means the locking screw needs to be tightened. Grab a Phillips screwdriver and pool goggles and tighten that screw! Hold the screwdriver next to you on the edge of the pool on a dry towel. With pool goggles on, get into the pool next to the loose fixture. Locate the locking screw of the fixture. It's a single screw on the top of a fixture's face that secures the pool light to the wall. Tighten the locking screw as tightly as possible. How to Repair a Pool Light Bulb For this pool light repair, it's good to have another person with you. One person watches the pool light as you turn the power back on. Also, purchase electrical contact grease if you can find it. It will make it much easier to remove any light bulb. Check your switchboard. If the light still doesn't turn on, the bulb has burned out. Unscrew the housing unit and place it on a dry towel on the edge of the pool near you. Insert a small amount of electrical contact grease into the socket. Remove the light bulb. Shake it next to your ear. If you hear a loose sound, it means the bulb has burned out and needs to be replaced. Unscrew the old light bulb and place it on the dry towel. Screw in a new light bulb. Test the new light bulb by quickly turning on your pool's power. (This should be done as quickly as possible because new light bulbs burn out when outside of the water.) It's best if someone else watches the light while you turn on the power. Checking for a Faulty or Tripped Switch If you don't hear anything rattling in the light bulb, it may be a tripped switch. Go to your switch panel. It should be in the AFS position with a red or yellow square pointing next to it. Make sure you turn off any additional accessories you have on the same circuit. Reset your switch by pressing it down completely and then moving it in the opposite direction to restore it. (If the switch automatically switches back on, you may need a new switch. >>> See more Best LED Strip Lights For Under Kitchen Cabinets at: https://www.linkedin.com/posts/bestledlightstripsblls_best-led-strip-lights-for-under-kitchen-cabinets-activity-7116241239686971392-KHyS
    0 Comments 0 Shares
  • 0 Comments 0 Shares
More Stories